On the form there is an image of St. Sergius of Radonezh.
The form is made using the vacuum molding method. The mold is made in the Russian Federation from ABS plastic 2 mm thick with an additional coating (Terlowran), which prevents sticking to the concrete mixture, and is intended for the production of products from heavy-duty colored concrete by vibration casting. When pouring the mold, additional equipment is required. When using low-quality cement, it is recommended to periodically clean the mold from adhering concrete. In the event of “sticking” (if the relevant conditions of the technological regulations are not observed), it is prohibited to clean the forms from concrete using the dry method.
Transportation of poured forms during the process of concrete hardening is not recommended.
Method: Vacuum forming< /p>
3 other products in the same category:
