Plastic Mold Semicircular Brick
Dimensions: 400 x 100 x 30 mm, 200 x 100 x 30 mm
Qty. in m2: 25 large or 50 small
Min purchase lot: 3 m2
Method: Vacuum forming
The product is not in stock and is produced specifically for your order.
The front surface of the plastic mold imitates brickwork with rounded edges.
The mold is produced by vacuum molding, the plastic thickness is 2 mm according to TU 4845-001-97557212-2006. Certificate of Conformity No. 1231281.
The mold is made in the Russian Federation from ABS plastic (polymer) with an additional coating (Terlowran), which prevents sticking to the concrete mixture, and is intended for the production of products from heavy-duty colored concrete by vibration casting. A mold with a semicircular surface requires additional equipment when pouring. When using low-quality cement, it is recommended to periodically clean the mold from adhering concrete. In the event of “sticking” (if the relevant conditions of the technological regulations are not observed), it is prohibited to clean the forms from concrete using a dry method.
Transportation of poured forms during the concrete hardening process is not recommended.
The color of the plastic form depends on the presence of dye in the plastic and may vary .