Plastic form Pig
$8.89
No tax
Dimensions: 550 x 550 x 25 mm
Transportation of poured forms during the concrete hardening process is not recommended.
The color of the plastic form is white.
Minimum purchase batch: 4 pcs
Method:< /strong> Vacuum forming
To order
The mold is used for gypsum products, used for interior decoration
The front surface of the plastic mold is made of bricks measuring 130x65 mm.
The mold is produced by vacuum molding from PVC plastic, 0.9 mm thick. The mold was made in the Russian Federation and is intended for the production of products from gypsum, as well as heavy-duty colored concrete by vibration casting. The inner surface of the mold is glossy.
When pouring, the mold does not require additional equipment. When using low-quality cement, it is recommended to periodically clean the form from adhering concrete. In the event of “sticking” (if the relevant conditions of the technological regulations are not observed), it is prohibited to clean the forms from concrete using the dry method.
8 other products in the same category:
Dimensions: 550 x 550 x 25 mm
Transportation of poured forms during the concrete hardening process is not recommended.
The color of the plastic form is white.
Minimum purchase batch: 4 pcs
Method:< /strong> Vacuum forming
To order